MetalTech I-CISO4PY Directivas De Seguridad E Instrucciones De Montaje página 3

ASSEMBLY INSTRUCTIONS
1 Erect the scaffold (one or two frames high) by following the manufacturer instructions.
Install caster into outrigger and secure it with lock pin. Set caster brake. Repeat with the other casters.
2
Place outrigger to end scaffold frame at a 90° angle to the side brace.
3
Lock outrigger into place by using two locking pins. If you use scaffolding with casters, you must
4
first remove the locking pin of the caster to attach the outrigger and then replace the locking pin
to lock the caster and base of the outrigger.
Firmly tighten the tightening knob so that the scaffolding and the outrigger are perfectly
5
lined up and united.
BOX CONTENTS
QTY. PART CODE
I-CISOPY001 Outriggers
4
VB-HMLM8X20 Tightening knobs
4
4 I-C1CAS5PY Casters
12 I-CAS5PIN Locking-pins
1
DESCRIPTION
2
5
4
3
3