Velleman VDPDMXDP134 Manual De Instrucciones página 2

3. General Guidelines
• This device is a lighting controller for professional use on stage, in discos, theatres, etc. The
VDPDMXDP134 should only be used indoors with an alternating current of max.
230Vac/50Hz.
• Do not shake the device. Avoid brute force when installing or operating the device.
• Select a location where the device will be protected against extreme heat, moisture and dust.
• Do not use or transport the device under temperatures < 5°C or > 35°C.
• Familiarise yourself with the functions of the device before actually using it. Do not permit
operation by unqualified people. Any damage that may occur will probably be due to
unprofessional use of the device.
• Use the original packaging if the device is to be transported.
• Note that all modifications of the device are forbidden for safety reasons.
• Do not remove the serial number sticker from the device as doing so will void the warranty.
Only use the device for its intended purpose. All other uses may cause short circuits, burns,
electroshocks, lamp explosions, crashes, etc. Using the device in an unauthorised way will
void the warranty.
4. Description
a) Front Panel
1. Automatic circuit breakers 20A
2. Preheating adjustment (max. 50%)
3. Power ON indicator
4. DMX channel output indicators
5. DMX "ON" indicator
6. Power switch
7. DMX channel output faders : adjusts the output level (dimming level) of each channel
8. DMX start address, selected via DIP switch settings
9. Load indicators
VDPDMXDP134 2 VELLEMAN