Publicidad
Idiomas disponibles
Idiomas disponibles
Attach the Solid Wood Top and Upper Supporting Frames
After assembly, ensure that the back of the upper supporting
frames are flush with the solid wood top's back.
Attach the Bottom Supporting Frames
Two open end wrenches (13 mm) are recommended. One to
screw the bolt, and another one to hold the nut while screwing
the bolt.
Husky 28" base cabinets with feet can be put under the
workbench. The workbench should be at a height where at least
10 holes in each bottom supporting frame post are visible.
Husky 28" base cabinets with casters can be put under the
workbench. The workbench should be at a height where 13 holes
in each bottom supporting frame post are visible.
Attach the upper and bottom supporting frames (C & D) together with
eight M8 x 85 hex boles (DD) and washers (BB) in the holes of the
supporting frames (C & D). Insert a washer (BB) and an M8 hex nut (CC)
onto the end of each M7 x 85 hex bold (DD). Tighten securely.
To t base cabinet with feet, 10 holes visible.
To t base cabinet with casters, 13 holes visible.
5
Please contact 1-888-HD-HUSKY for further assistance.
WWW.HUSKYTOOLS.COM
Publicidad
