Publicidad
1.Put together upper and lower main 2.Install legs with 5/16×1-1/4 bolts 3. Install leg brace using 5/16×3/4
frame. Do not Put in bolts.
4. Install wheels and axle. Put on 5.Install gear motor with flat washer, 6. Install metal cover on gear motor
washer and cotter pin.
.
7.Slide on drum. Line up 1/2'' hole.
Assembly Instructions
and 5/16 Nuts.
spring washer and nuts Tighten
with 10 MM wrench.
8. Install 5/16'' bolts and lock nut.
bolts and 5/16 nuts.
with 5/16×3/4 bolts.
9. Install handles and clevis pin with
land yard.
11
Publicidad
