Publicidad
Idiomas disponibles
Idiomas disponibles
• The shelves placed in factory mode is the most efficient use of
energy for the refrigerating appliances
• This unit is intended for free-standing installation only. It must
never be built-under or built-in. For proper operation of the
appliance, it is imperative to allow good air circulation around
the unit. We do not accept any liability instance of non-
compliance with the installation instructions.
• Avoid locating the unit in moist areas.
• Keep the appliance away from direct sunlight and sources of
heat (stove, heater, radiator, etc.). Direct sunlight may affect
the acrylic coating and heat sources may increase electrical
consumption. Extreme cold or hot ambient temperatures may
also cause the appliances not to perform properly.
• Plug the wine cooler into an exclusive, properly installed-
grounded wall outlet. Do not under any circumstances cut or
remove the third (ground) prong from the power cord. Any
questions concerning power and/or grounding should be
directed toward a certified electrician or an authorized products
service center.
• To
ensure
recommendations given in the present manual.
• Unpack the appliance and visually check that it is not damaged.
Do not connect a damaged appliance. Inform your retailer or
point of sale of any damage. In such a case, keep the
packaging.
• It is recommended that the appliance be allowed to settle for at
least 24 hours before connecting the electrical power supply,
so that the compressor fluid feed is correct.
• Proper air circulation is necessary to avoid overheating. To
ensure
sufficient
recommendations provided.
proper
electrical
ventilation,
connection,
observe
the
follow
the
installation
33
Publicidad
