Erbauer EPM18-Li Instrucciones Originales página 25

Assembly
01
Unpacking
1. Unpack all parts and lay them on a flat, stable surface.
2. Remove all packing materials and shipping devices, if applicable.
3. Make sure the delivery contents are complete and free of any damage. If you find
that parts are missing or show damage, do not use the product but contact your
dealer. Using an incomplete or damaged product represents a hazard to people
and property.
4. Ensure all the accessories and tools needed for assembly and operation are at
your disposal, including suitable personal protective equipment.
WARNING! The product and the packaging are not children's toys! Keep
plastics bags, sheets and small parts away from children. There is a
danger of choking and suffocation!
Do not insert the battery pack before the power tool is completely
assembled!
NOTE: Take care of small parts that are removed during assembly or
when making adjustments. Keep them secure to avoid loss.
02
Setup
Battery pack (not included)
Release / Attach
1. To remove the battery pack, press down the release button (12c) and pull out the
battery pack (12) from the battery docking port (5) (Fig. A).
2. Align and slide the battery pack (12) to the battery docking port (5) all the way to
stop. Make sure that the electrical contacts (5a) of the battery docking port (5) are
fully inserted into the slots of battery pack (12) (Fig. B).
Charging the battery pack
The battery has been shipped in a low charge condition. Charge it fully before first use.
Refer to the charger instruction manual for the details.
MNL_Erbauer_18V DC Paddle Mixer_EPM18-Li_V2_220117 II.indd 25
25
1/17/22 12:21 PM