Publicidad
Idiomas disponibles
Idiomas disponibles
Use Instructions.
1. Place your fan on a flat, stable and dry surface.
2. Check that the speed selector is in the "0" position.
3. Plug the appliance into the electric current of 220V ~ 50 Hz.
4. Adjust the fan to the desired angle.
5. Turn on the appliance by adjusting the speed selector to the desired speed.
- (0) Off.
- (1) Low speed.
- (2) Average speed.
- (3) High speed.
6. To switch off the appliance, set the speed selector to the "0" position.
7. Always unplug the appliance from the electric power when it is not in use or unattended.
Note.
Always before plugging in and unplugging the electric current, the speed selector must be
in the "0" position.
Cleaning Instructions.
- Always unplug the appliance from the electrical current before cleaning it.
- This product must be cleaned and checked regularly.
- Make sure the blades are always clean to prevent damage or loss of color.
- Remove the front grill by removing the screw to remove the grill.
- Remove the central blade retaining nut "4" to remove the blades.
- Remove the rear grill by removing the mounting nut "7".
- Clean the blades and grilles by vacuuming with a vacuum cleaner or by using compressed air.
- You can also clean the blades and grilles with a cloth dampened in water with neutral soap.
- Be careful that the engine does not drop water during cleaning.
- Blades and grilles must be completely dry before replacing.
- Put all the pieces back in their place and fix all the screws and nuts.
- Do not use chemical or abrasive cleaning products, only neutral soap.
Appliance
Storage.
- Always keep the appliance clean and dry.
- Store the device in its plastic and original box.
- Store in a cool, dry and dust free place.
Specifications.
- Voltage: 220V / 50Hz.
- Power: 50W.
- 3 Speeds.
- Size: 16" (40.6cm).
- Silent engine.
- Protective grid.
- Adjustable height adjustable mast.
- 90º oscillating head with adjustable inclination.
Publicidad
