Descargar Imprimir esta página

Candy HOT3160B E0 Instrucciones De Uso página 6

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 40
3. Use of the Oven (According to model)
3.1 Display description
1
1. Thermostat selector knob
2. Thermostat signal lamp
3. End of cooking
4. Cooking time
5. Temperature or clock display
6. LCD display adjustment controls
7. Minute minder
8. Clock setting
9. Wifi signal lamp
10. Function selector knob
FUNCTION
HOW TO USE
•Child Lock function is activated by
touching Set (+) for a minimum of
seconds. From this moment on all
KEY LOCK
other function are locked
display will flash
3 sec intervals
and preset time intermittently.
•Push the central button 3 times
MINUTE
•Press the buttons "-" "+" to set
MINDER
the required time
•Release all the buttons
•Select the cooking function with the
oven function knob, the temperature
you want to cook with the thermostat
knob.
COOKING
• Push the central button 1 times
TIME
• Press the buttons "-" or "+"to set the
lenght of cooking required
• Release all buttons
NOTE: If the oven is switched off or
the lamp is functioning, the cooking
time schedule function will not work.
•Select the cooking function with the
oven function knob, the temperature
you want to cook with the thermostat
knob.
•Push the central button times
•Press the buttons "-" "+" to set the
END OF
time at which you wish the oven to
COOKING
switch off
•Release the buttons
NOTE: If the oven is switched off or
the lamp is functioning, the cooking
time schedule function will not work.
3
2
4
WARNING : the first operation to carry out after the oven has been installed or following the interruption
of power supply (this is recognizable the display pulsating and showing
The bottom right LED flashes at the same time (
•Set time with
"-" "+"
•Push the Menu button or
ATTENTION: The oven will only operate setting the clock
HOW TO DEACTIVATE
•Child Lock function is deactivated by
5
touching touchpad Set (+) again for a
minimum of
5
seconds. From this
and the
m o m e n t o n a l l f u n c t i o n s a re
STOP
selectable again.
•When the set time has elapsed, an
audible alarm is
activated this alarm will stop on its
own, however it can be stopped
immediately by pressing any button.
•Push any button to stop the signal.
Push the central button to return to
the clock function.
•At the time set, the oven will switch
off. To switch off manually, turn the
oven function selector to position O.
2
5
6
buttons.
wait 5 seconds
than the clock is setted.
WHAT IT DOES
•Sounds an alarm at the end of the
full stop after
set time.
•During the process, the display
shows the remaining time.
• It allows to preset the cooking time
required for the recipe chosen.
• To check how long is left to run press
the MENU button 1 time.
• To alter/change the preset time press
MENU and "-" "+" buttons.
•Enables you to set the end of
cooking time
•To check the preset time push the
central button 2 times
•To modify the preset time press
buttons MENU + "-" "+"
EN 06
7
9
8
12:00
) is setting the correct time.
).
This is achieved as follows.
•Allows to use the oven as alarm clock
(could be activated either with operating
the oven or with out operating the oven)
•At the end of the program the program
gives 3 warning signals and "End" appears
on the display.
Set the function selector switch to "0" to
return to the clock function.
•This function is typically used with
"cooking time" function.
For example if the dish has to be cooked for
45 minutes and needs to be ready by
12:30, simply select the required
function, set the cooking time to 45
minutes and the end of cooking time to
12:30.
•At the end of the cooking set time, the
oven will switch off automatically and an
audible alarm will ring.
•Cooking will start automatically at 11:45
(12:30 minus 45 mins) and will continue
until the pre-set end-of-cooking-time,
when the oven will switch itself off
automatically.
10
NOTE

Publicidad

loading