HQ-Power VDPDMXC145 Manual página 4

13. MUSIC / BANK COPY
MUSIC
BANK COPY : Press this button to copy a bank when the device is in the
14. TAP SYNC / DISPLAY
TAP SYNC : When the device is in the AUTO RUN mode, the running speed
DISPLAY
15. BLACKOUT
Press this button to set the output of all channels to 0%. This does NOT affect the
other functions of the device. Press this button again to deactivate the blackout
mode.
b) Back Panel
16. MIDI IN
17. DMX POLARITY SELECT
18. DMX OUT (3-pole XLR)
19. DC input (9-12V, 300mA)
c) Connections
The manufacturer is not responsible for damage caused by improper connections.
Connect the supplied adapter with the DC jack and connect the other end with a mains outlet.
The device has a built-in microphone for sound control. Use the MIDI input if you want sound
control by an external source.
5. Operating Instructions
Programming Scenes
Hold the PROGRAM button for 2 seconds to activate the PROGRAM mode. The PROGRAM
LED will flash.
a) Scene Programming
1. Press the desired SCANNER button to select a device
2. It is possible to select several devices and control them simultaneously.
3. Adjust the appropriate faders to the desired output level.
4. Press the MIDI/ADD button
5. Select the desired bank with ▲ or ▼.
6. Press a SCENE button to store this scene in the selected bank.
VDPDMXC145
: Push this button while in the device is in RUN mode. The MUSIC
mode is now activated and the MUSIC TRIGGER LED is lit. Press
this button again to deactivate the MUSIC mode.
programming mode.
depends on the duration of the interval between the last two times you
pressed the TAP SYNC/DISPLAY button.
: Press this button to choose between 00-255 or 0%-100% display for
the faders.
Fig. 2
4 VELLEMAN