Publicidad
Idiomas disponibles
Idiomas disponibles
CHAPTER -3: USING YOUR FRIDGE FREEZER
Control panel
Temperature set button
Super Cooling Mode
Temperature set button
This button allows setting temperature of the fridge. In order to set values for fridge partition, press this button. Use this
button also to activate Super Cooling mode.
Alarm light
In case of a problem within the fridge, the alarm led will release red light
Super Cooling Mode
When would it be used?
• To cooling huge quantities of food.
• To cooling fast food.
• To cooling food quickly.
• To store seasonal food for a long time.
How to use?
• Press temperature set button until super cooling light comes on.
• Super cooling led will light during this mode.
• For optimal appliance performance in maximum cooling capacity, set the appliance to active Super Cooling
mode 5 hours before you put the fresh food into the fridge.
During this mode:
If you press temperature set button, the mode will be cancelled and the setting will be restored from MAX.
Note: "Super cooling" mode will be automatically cancelled after 5 hours.
Temperature Settings
• The initial temperature of the Setting Display is Middle temperature indicator.
• Press temperature set button once.
• Every time you press the button, the setting temperature will decrease.
• If you press temperature set button until super cooling symbol is displayed on your fridge settings display and
you do not press any button within the following 3 seconds, Super cooling will blink.
• If you keep on pressing, it will restart from last value.
It ensures that the temperature settings in the cooling and freezing compartments of your refrigerator are performed
automatically. It may be set to any value ranging from MIN to MAX. As you press temperature set button from MIN
to MAX, the temperature decreases. To save energy in winter months, operate your refrigerator in a lower position.
Warnings for temperature settings
• The ambient temperature, temperature of the freshly stored food and how often the door is opened, affects the
temperature in the refrigerator compartment. If required,change the temperature setting.
• It is not recommended that you operate your fridge in environments colder than 10°C .
• Do not pass to another adjustment before completing an adjustment.
• The thermostat setting should be set by taking into consideration how often the fresh food and freezer doors
are opened and closed, how much food is stored in the refrigerator and the environment in which and the
positioning of the appliance.
• We recommend that when first using the fridge freezer it should be left running for 24 hours uninterrupted to
ensure it is completely cooled. Do not open the fridge doors, or put food inside for this period.
• Your fridge freezer has a 5 minute built in delay function, designed to prevent damage to the compressor. When
power is applied to your fridge freezer, it will begin to operate
normally after 5 minutes.
• Your fridge is designed to operate in the ambient temperature
intervals stated in the standards, according to the climate class
stated in the information label. It is not recommended that your
fridge is operated in the environments which are out of the
stated temperature intervals in terms of cooling efficiency.
• This appliance is designed for use at an ambient temperature
within the 16°C - 43°C range.
Alarm
indicator led
super
Symbol of
Temperature indicator
Climate Class
T
ST
N
SN
EN -7-
Ambient Temperature
o
Between 16 and 43 (°C)
Between 16 and 38 (°C)
Between 16 and 32 (°C)
Between 10 and 32 (°C)
C
Publicidad
