OPERATION
1. Mode COOL:
•
When the device is on or the timer is on, press MODE to select the COOL mode. At this time the
mode indicator light is displayed.
•
Press ▲/▼ to set the appropriate temperature in the range of 16-30°C.
•
Press the SPEED key to choose High/Medium/Low speed.
2. Mode FAN:
•
When the unit is on or the timer is on, press MODE to select FAN mode. At this time the
corresponding indicator light will activate.
•
Press the SPEED key to select the High/Medium/Low speed.
•
The temperature is not adjustable.
3. Mode DRY:
•
When the device is on or the timer is on, press MODE to select the DRY
mode. At this time the corresponding indicator light will activate.
•
If the ambient temperature is >15°C, the compressor will start to run. It
will then follow the rules below. If the ambient temperature is <13°C the
compressor will stop and when it returns to >15°C it will restart.
•
Temperature and speed are not adjustable.
WARNING! When the DRY function is used, the components must
be removed from the outlet pipe, otherwise it will cause a worse
dehumidification performance, and the water fill alarm "FL" will appear.
4. Automatic mode:
•
If the mode key is pressed, it enters the automatic mode, in which, depending on the ambient
temperature, if it is higher than 25ºC the cooling will be activated (COOL) and when it is lower,
only the fan will work (FUN).
5. TIMER:
•
In standby mode, press the TIMER key to set the power on time. Press the ▲ and ▼ keys to set the
power on time (0~24H), and the timer indicator light will light up.
•
In the ON state, press the TIMER key to set the off time. Press the ▲ and ▼ keys to set the time
(0~24H), and the timer indicator lamp will light up.
DRAIN OPERATION
If the inner container is full of water, the display screen will show "FL", and the engine will stop running automatically.
After disabling, unscrew the water cover, remove the water wedge to drain it, and operation will return to normal after
being restarted.
WARNING! When the water tank is full, please move the air conditioner
firmly, otherwise the water may overflow from inside.
Mc HAUS
artic-22