Publicidad
ENGLISH
•
Do not use the appliance if it is damaged or malfunctions.
•
Do not twist or kink the cable, or wrap it round the appliance. Check the cord regularly for any signs
of damage.
•
CAUTION: Always remove the appliance from the storage pouch/sleeve before heating and allow it
to fully cool before placing it back.
•
This appliance is not intended for commercial or salon use.
PARTS
1.
Advanced ceramic coated plates
2.
Temperature display
3.
Hydracare ON icon
4.
Hydracare moisture mist outlet
5.
Water reservoir
6.
Swivel cord
7.
Hinge lock
ADDITIONAL FEATURES
•
Fast heat up—ready to use in 15 seconds.
•
Automatic safety shut off – this unit will switch itself off if no button is pressed or it is left on after 60
minutes.
•
Multivoltage: for home or abroad. At 120V times and temperatures may vary.
INSTRUCTIONS FOR USE
•
Before use, ensure the hair is clean, dry and tangle-free.
•
For extra protection use a heat protection spray.
•
Hairsprays contain flammable material - do not use while using this product.
•
Section the hair prior to styling. Style the lower layers first.
•
Your straightener can also be used without activating the Hydracare function.
•
Before operating the Hydracare function, the reservoir must be filled with water.
•
DO NOT operate Hydracare function if the reservoir is empty.
Filling the Reservoir
•
Unplug your straightener before filling the reservoir.
•
Beware of the the hot plates if your straightener has been in use.
1.
Lift the front end of the reservoir upwards slightly (fig. A).
2.
Slide the reservoir forwards and lift out (fig. B).
3.
Gently open the plug using the tab and fill with water using the pipette provided (fig. C).
4.
Replace the plug securely and dry off any excess water on your hands and the outside of the reservoir.
5.
Replace the reservoir into the body of the straightener and press it downwards until it clicks into
place.
•
To prolong the life of the product we recommend using filtered or distilled water ONLY.
Using
1.
Plug the product into the mains power supply.
2.
When the styler is plugged in but not turned on, a lock symbol Lwill show on the display indicating
the styler is in standby mode.
4
Controls:
On/off button
C
+/– Temperature functions
Hydracare on/off button
Accessories (not shown):
•
Pipette
•
Protective silicone sleeve
Publicidad
