Intenso P5200 Instrucciones De Uso página 15

b) Charging devices through the Powerbank
 Please connect the included USB cable to the USB A port on the
Powerbank and the other end of the USB cable to the micro USB port of
the device to be charged. Press the function button to start the charging
process.
 Of course, you can also use your own USB charging cable to connect the
Powerbank with your device. Please note, however, that devices can be
charged only through the USB A port of the Powerbank.
 If a device is charged with the Powerbank and the Powerbank has almost
reached its capacity limits, this is signalled by flashing of the last status
LED. Please charge the Powerbank again.
 Please note that, when charging a device with a Powerbank nearly 30% of
total capacity is consumed by the charging process alone. This is caused
for example by the loss of power from circuit heat and voltage
conversion.
 For optimal performance, the Powerbank must be used regularly. If this is
not the case, fully charge the Powerbank at least every three months.
Page 6 of 8 EN