Blaupunkt 5VT7X00EME Instrucciones De Uso página 85

CONNECTING THE DRAIN HOSES
Insert the drain hose into a drain pipe with a minimum diameter of 4 cm or let it run into the sink,
taking care not to kink or crush it. The height of the drain hose must be less than 1,000 mm.
To avoid backflow in the hose, the free end of the hose must not be immersed in water.
Fix the drain hose securely in position A or B.
worktop
back of dishwasher
A
drain hose
B
water supply Ø 40 mm
drain pipe
main cable
Draining excess water from hoses
If the sink is 1,000 mm higher than the floor, the excess water in the hoses cannot be drained directly
into the sink. In this case, excess water from the hoses must be drained into a bowl or suitable vessel
located outside and lower than the sink.
Water supply
Connect the water drain hose. The drain hose must be correctly installed to prevent water leaks.
Ensure that the water hose is not kinked or crushed.
35