Philips GC8700 Serie Manual página 9

Steam boost function
Put the mains plug in an earthed wall socket and press the on/off button
to switch on the steam generator. Wait until the 'iron ready' light lights up
continuously. This takes approx.
Remove the water supply hose from the water supply hose storage
compartment.
Press the carry lock release button to unlock the iron from the iron
platform.
Press and hold the steam trigger to start ironing.
Warning: Never direct steam at people.
For best ironing results, after ironing with steam, perform the last strokes
without steam.
Note: When you use the appliance for the first time, it may take
for steam to come out of the appliance.
Note: The pump is activated each time you press the steam trigger. It
produces subtle rattling sound, which is normal. When there is no water in
the water tank, the pump sound is louder. Fill up the water tank with water
when the water level drops below the minimum level.
For more powerful steam, you can use the TURBO steam mode, which is
safe on all ironable fabrics.
For fabrics such as cotton, jeans and linen, you are recommended to use the
TURBO steam mode.
Press and hold the on/off button for
To deactivate the TURBO mode, press and hold the on/off button for
seconds again until the light turns blue.
Use the steam boost function to remove stubborn creases.
minutes.
seconds until the light turns white.
English
seconds