Pioneer MVH-S110UI Manual De Instrucciones página 6

NOTE
The options vary depending on the unit.
Menu Item
FM STEP
[100], [50]
SP-P/O MODE
[REAR/SUB.W]
[SUB.W/SUB.W]
[REAR/REAR]
S/W UPDATE
[SYSTEM INFO]
[SYSTEM UPDATE] Select to update the unit to the latest software and initialize the
SYSTEM RESET
[YES], [NO]
Radio
The tuner frequencies on this unit are allocated for use in Western Europe, Asia, the
Middle East, Africa and Oceania. Use in other areas may result in poor reception. The RDS
(radio data system) function only works in areas that broadcast RDS signals for FM
stations.
Receiving preset stations
1
Press SRC/OFF to select [RADIO].
2
Press BAND/
Description
Select the FM tuning step from 100 kHz or 50 kHz.
Select when there is a full-range speaker connected to the rear
speaker output leads and there is a subwoofer connected to the
RCA output.
Select when there is a passive subwoofer connected directly to
the rear speaker output leads and there is a subwoofer
connected to the RCA output.
Select when there are full-range speakers connected to the rear
speaker output leads and RCA output. If there is a full-range
speaker connected to the rear speaker output leads, and the
RCA output is not used, you may select either [REAR/SUB.W] or
[REAR/REAR].
Select to confirm the latest system information on the unit.
unit settings. For details on the latest software and updating,
visit our website.
Select [YES] to initialize the unit settings. The unit will be
restarted automatically.
(Some of the settings may be retained even after resetting the
unit.)
to select the band from [FM1], [FM2], [FM3], [MW] or [LW].
- 6 -