Publicidad
Idiomas disponibles
Idiomas disponibles
a
Quick start guide
Foot Warmer
For more information see the extended manual
online: ned.is/pefw110cgy
Intended use
The Nedis PEFW110CGY is a foot warmer with a detachable
controller that includes a timer, 6 heat levels and LED display.
The product offers protection against overheating and the
removable synthetic wool lining is machine washable.
The product is intended for indoor use only.
This product can be used by children aged from 8 years and above
and persons with reduced physical, sensory or mental capabilities
or lack of experience and knowledge if they have been given
supervision or instruction concerning use of the product in a safe
way and understand the hazards involved. Children shall not play
with the product. Cleaning and user maintenance shall not be done
by children without supervision.
This product is not intended for persons insensitive to heat and
other vulnerable persons, such as children under the age of 3, who
are unable to react to overheating.
The product is not intended for professional use.
The product is not intended for medical use in hospitals.
This product is not intended for warming animals.
Any modification of the product may have consequences for safety,
warranty and proper functioning.
Specifications
Product
Article number
Dimensions (l x w x h)
Power supply
Power consumption
Max. temperature setting
Material
Main parts (image A)
1
Removable synthetic wool lining
2
LED display
3
On/off button
4
Temperature button
5
Power cable
Safety instructions
-
WARNING
•
Only use the product as described in this document.
•
Ensure you have fully read and understood the instructions in
this document before you install or use the product. Keep this
document for future reference.
•
Do not use the product if a part is damaged or defective. Replace
a damaged or defective product immediately.
•
This product may only be serviced by a qualified technician for
maintenance to reduce the risk of electric shock.
•
Unplug the product from the power source if problems occur.
•
Do not unplug the product by pulling on the cable. Always grasp
the plug and pull.
•
Make sure the product and power cable do not get trapped
when in use.
•
Do not let the power cable touch hot surfaces.
•
Unplug the product when not in use and before cleaning.
PEFW110CGY
Foot Warmer
PEFW110CGY
310 x 250 x 270 mm
220 - 240 VAC ; 50 Hz
100 W
Up to 50 °C
Micro plush, sponge and removable
synthetic wool lining
•
Do not drop the product and avoid bumping.
•
Always use the voltage (A.C. Only) marked on the rating label.
•
Only use the product with the provided controller.
•
Always switch off the controller before you insert or remove a
plug.
•
Do not expose the product to water, rain, moisture or high
humidity.
•
Do not immerse the product in water for cleaning.
•
Do not use the product when it is damp or wet.
•
Do not use the product in wet or damp environments.
•
Do not use together with another heating appliance.
•
Do not expose the product to direct sunlight, naked flames or
heat.
•
Do not use the heating pad directly on your skin.
•
Prolonged use at the highest temperature level could lead to
burns.
•
It is recommended to adjust the temperature to a setting for
continuous use when the product is likely to be used for an
extended period.
•
Do not fall asleep when using the product.
•
Children should be supervised to ensure that they do not play
with the product.
•
Cleaning and user maintenance shall not be done by children
without supervision.
Preheat
-
Do not use the product when it is damp or wet.
-
Make sure the product and power cable do not get trapped
when in use.
4
Preheat 10 minutes before using.
1. Connect the power cable A
2. Press and hold the on/off button A
2
The LED display A
shows temperature level 3.
3. Press the temperature button A
temperature level 6.
Allow the product to preheat for 10 minutes. The product can now
be used.
Using the product
-
Do not use the heating pad directly on your skin.
-
Prolonged use at the highest temperature level could lead to
burns.
-
It is recommended to adjust the temperature to a setting for
continuous use when the product is likely to be used for an
extended period.
4
Use the back of your hand to test the temperature and to avoid
burn injuries to the skin.
4
•
Press A
to set the desired temperature between 1 (low) and 6
(high).
The product automatically switches off after 90 minutes.
After use
3
1. Press and hold A
for 3 seconds to switch off the product.
2. Unplug the product from the power outlet and allow it to cool
down.
Storing the product
1. Make sure the product is dry.
-
Allow the product to dry naturally. Do not dry the product in the
sun, do not use a product such as a hair dryer to dry it and do not
connect it to the power outlet to dry it.
2. Gently fold the product and place it back into the packaging.
4
Do not crease the product.
3. Store in a cool dry place.
4
Do not place any objects on the product.
3
5
to a power outlet.
3
for 3 seconds.
4
2
until A
shows
Publicidad
