Cisco Meraki MS320 Serie Guía De Instalación Rápida página 4

Safety Warnings：
Do NOT use this product near water, for example, in a
wet basement or near aswimming pool.
Do NOT expose your device to dampness, dust or
corrosive liquids.
Do NOT store things on the device.
Do NOT install, use, or service this device during a
thunderstorm. There is aremote risk of electric shock
from lightning.
Connect ONLY suitable accessories to the device.
Do NOT open the device or unit. Opening or
removing covers can expose you todangerous high
voltage or other risks. ONLY qualified service
personnel shouldservice or disassemble this device.
Please contact your vendor for furtherinformation.
For continued protection against risk of fire replace
only with same type and ratingof fuse.
Make sure to connect the cables to the correct ports.
Place connecting cables carefully so that no one will
step on them or stumble overthem.
Always disconnect all cables from this device before
servicing or disassembling.
Use ONLY an appropriate power adaptor or cord for
your device. Connect it to a proper supply voltage
according to electrical rating of the product or power
supply unit.
Do NOT allow anything to rest on the power adaptor
or cord and do NOT place theproduct where anyone
can walk on the power adaptor or cord.
Do NOT use the device if the power adaptor or cord is
damaged as it might causeelectrocution.
If the power adaptor or cord is damaged, remove it
from the device and the powersource.
4