Premier MDP-4441 Manual De Instrucciones página 16

(Cold Water Only)
Water hose must be at least 3/4 inch in diameter.
Flow rate of water supply must be more than 1.85 GPM (gallons per minute).
Flow rate can be determined by spraying the water into an empty 5-galons container for one minute.
The water supply temperature must not exceed 50
Never use water contained with solvents, e.g. paint thinners, gasoline, oil, etc.
Always prevent debris from being drawn into the unit by using a clean water source.
We strongly recommend that this high pressure washer should not be left running without the trigger gun
being engaged for more than 5 minutes or longer.
Caution
Follow the maintenance instructions specified in the manual.
P-5