Publicidad
Idiomas disponibles
Idiomas disponibles
Operation
(Continued)
• Save all instructions
E
How to Redirect Air Flow toward the Front (Continued)
When not in use, the front flow attachment can be stored
under the frame at the rear of the unit.
attachment for storage, follow the steps below and refer to
Figure 10:
1. Turn the attachment so "This Side Up For STORAGE" is up.
2. Insert the attachment into frame opening, with the
orientation identified on the label.
3. The edge of the attachment will be supported by a bracket
under the frame.
4. Secure the attachment by forcing it upward and rotating
it so the pin on the frame will insert into the slot on the
attachment.
E
Tips for Using your Walk Behind Blower
WARNING
Read the Operator's manual. Know location and functions
of all controls. Keep all safety devices and shields in place.
Never allow children or uninstructed adults to operate the
blower. Keep bystanders away from machine. Keep away
from the fan intake opening and discharge chute, as the fan
is rotating and can cause severe injury.
• Blowing leaves is best performed when conditions are dry.
• To clear a very large and/or heavy pile of leaves, make
two passes: First point the directional adjustment upward
to move the top of the pile. Then point the directional
adjustment downward to move the base of the pile.
• When clearing leaves, always pay attention to natural
wind direction and blow the leaves the same direction as
the natural wind.
• To clear a small area, corral the leaves in the center by
circling several times around the perimeter of the area.
• To clear a large area, move the leaves from one side to
the other by making back and forth passes.
• Before starting a cleaning project, plan how the leaves will
be collected and disposed.
Questions? Call Toll Free at 1-800-737-2112
To secure the
Support
Rod
11
Slot
Front Flow
Attachment
Copyright © 2009 MAT Engine Technologies, LLC
Figure 10
Publicidad
