Publicidad
Idiomas disponibles
Idiomas disponibles
DIGITAL SEPARATE SPEED CLUTCH
As an additional safety feature, the speed control buttons can be "locked".
1.
To start the lock feature. Turn on the tool and speed up it until reaching the speed
setting required. Press both sides of the speed control button for about 1 second,
and then the LCD display will show a
control buttons are locked.
NOTE
1.
When the lock feature is active, the tool will automatically run at the last speed
setting prior to being turned OFF.
2.
When the
above steps to set the lock feature.
3.
When the lock feature is active, the tool still can be turned off by pressing the
power on/off button and the lock feature will be cancelled automatically.
2.
To cancel the lock feature press both sides of the speed control button (see Fig.12A)
for about 1 seconds, then the
disappear. That indicates the speed control button is unlocked.
HAND POSTURE OF USING THE ROTARY TOOL
The first step to using the Rotary Tool is to feel it. Use your hand to feel its weight,
balance and housing shape. For the best control on close work, grip it like a pen
between your thumb and forefinger. For operations of flat-surface grinding or wheel
cut-off, hand-grip it like a pipe.
1English1
symbol is shown on the LCD display, you can still follow the
English
symbol. That indicates the speed
symbol on the LCD display (see Fig.12B) will
-13
Publicidad
