Bosch GLI18V-1900 Instrucciones De Funcionamiento Y Seguridad página 8

2610067460 GLI18V-1900 08-21_GLI18V-1900 8/19/21 10:01 AM Page 8
STANDING UP
Carefully fold out the pedestal and place the
cordless worklight on the floor. Ensure that it
has a firm footing.
SWIVELING STAND
The lamp head can be swiveled a maximum
120° in 30-degree steps to suit the
application (Fig. 3).
FASTENING TO AN OPTIONAL TRIPOD
You can use the tripod mount to screw the
cordless worklight onto an optional tripod that
has 5/8"-11 threading (sold separately).
Thread the cordless work light onto the
tripod. Ensure that the cordless work light is
securely mounted to the tripod.
Preventive maintenance performed by un -
au thorized personnel may result in
misplacing of internal wires and
components which could cause serious
hazard. We recom mend that all tool service
be performed by a Bosch Factory Service
Center or Authorized Bosch Service Station.
SERVICE MEN: Disconnect tool and/or
charger from power source before servicing.
BATTERIES
Be alert for battery packs that are nearing
their end of life. If you notice decreased tool
performance or significantly shorter running
time between charges then it is time to
replace the battery pack. Failure to do so
can cause the tool to operate improperly or
damage the charger.
Maintenance
Service
NO USER SERVICE-
ABLE PARTS INSIDE.
120°
Cleaning
To avoid accidents,
always disconnect the
tool and/or charger from the power supply
before cleaning. The tool may be cleaned
most effectively with com pressed dry air.
Always wear safety goggles when cleaning
tools with compressed air.
To avoid damage, clean the plastic lens of the
cordless worklight only with a dry, soft cloth.
Do not use cleaning agents or solvent.
Certain cleaning agents
and solvents damage
plastic parts. Some of these are: gasoline,
car bon tetrachloride, chlorinated cleaning
solvents, ammonia and household detergents
that contain ammonia.
-8-
FIG. 3
30°
0°