Publicidad
Idiomas disponibles
Idiomas disponibles
EN
USB-C Quattro Display Docking Station with Power Delivery 85 W
SYSTEM REQUIREMENTS
Hardware requirements:
Device with a free USB-C or Thunderbolt™3 port
Requirements for Power Delivery feature:
Device with a free USB-C or Thunderbolt™3 port with "Power Delivery" support
Requirements for video output:
Device with a free USB-C port with "DisplayPort Alternate Mode" support
or a Thunderbolt™3 port
Operating system:
Windows 10, macOS*, Android,and Linux with the latest updates
* macOS does not support Multi Stream Transport (MST) technology. Connecting
two monitors to the station on macOS will result in both DisplayPort monitors
showing the same image.
DRIVER INSTALLATION IN WINDOWS 7 / 8 / 8.1 / 10 (32/64 BIT)
ATTENTION! Do not connect the docking station to your laptop / tablet until you
have installed the appropriate drivers. Drivers must only be installed before first
use. Before installation, make sure that your system has installed the latest
drivers for your device and updated BIOS.
For Windows, download the drivers from our website www.i-tec.cz/setup on the
"Download" tab of this product. Run the installation from the downloaded file,
select the installation language, and follow the instructions on the screen.
In Windows 7 / 8 / 8.1 / 10, install the drivers as the "Administrator" user. The
screen may blink while the drivers are being installed, this is a standard process.
Once the installation is complete, we recommend restarting the notebook / tablet.
In the environment with more than one laptops equipped with Windows 7, 8,
8.1 operating system, a single-shot corporative installation by the system
administrator can be performed. For more information on a method of installation,
please refer to the instructions below):
http://www.displaylink.com/downloads/corporate
8
Publicidad
