Bose Professional DesignMax DM8C-SUB Guia De Instalacion página 3

PRO.BOSE.COM
Package Contents
×1
Product Dimensions
409 mm
16.1 in
Technical Specifications
For additional specifications, see the DesignMax DM8C-SUB
technical data sheet at PRO.BOSE.COM.
Physical
Product Dimensions
Hole cutout
Maximum Ceiling
Thickness
Net Weight,
Loudspeaker with grille
Net Weight, Tile Bridge
Shipping Weight
Installation Guide • DesignMax DM8C-SUB
×1
Grille diameter: 409 mm (16.1 in)
Enclosure diameter: 342 mm (13.5 in)
Backcan depth: 241 mm (9.5 in)
349 mm (13.75 in)
76 mm (3.0 in)
9.80 kg (21.6 lb)
1.00 kg (2.2 lb)
12.93 kg (28.5 lb)
×1
255 mm
10.0 in
241 mm
9.5 in
76 mm
3.0 in
Important Installation Information
This product is intended for indoor use only.
It is the installer's responsibility to ensure installation of the
loudspeakers and mounting system is performed in accordance with
all applicable codes, including local building codes and regulations.
Consult the local authority having jurisdiction before installing this
product.
It is the responsibility of the installer to ensure the safety of the
loudspeaker installation. Failure to properly install the loudspeaker
could result in damage, injury, or death.
Do not mount the product in locations where it may be exposed to
water or condensation.
This product is not intended for installation or use in indoor water
facility areas (including, without limitation, indoor pools, indoor water
parks, hot tub rooms, saunas, steam rooms and indoor skating rinks).
Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.
Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produces heat.
Do not mount on surfaces that are not sturdy, or that have hazards
concealed behind them, such as electrical wiring or plumbing. If you
are not sure about installing the bracket, contact a qualified
professional installer. Ensure the bracket is installed according to local
building codes.
Do not expose loudspeaker or mounting components to any chemical
substances that are not specified by Bose, including but not limited
to lubricants, cleaning agents, contact sprays, or other hydrocarbon-
based solvents. Exposure to such substances can lead to degradation
of the plastic material, resulting in cracking and creating a falling
hazard.
×2
342 mm
13.5 in
Overview
×1
English • 3