Publicidad
Idiomas disponibles
Idiomas disponibles
Indoor Wireless Remote Control Outlets
WARNING:
Danger of explosion if battery is incorrectly replaced. When replacing battery,
replace it with the same or equivalent type CR2032. Observe correct polarity (+ and –) when
replacing batteries. Do not store or carry batteries so that metal objects can contact exposed
battery terminals.
DANGER:
DO NOT INGEST BATTERY; CHEMICAL BURN HAZARD. This product contains
a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal
burns in just 2 hours and can lead to death.
Keep new and used batteries away from children. If the battery compartment does not close
securely, stop using the product and keep it away from children.
If you think batteries might have been swallowed or placed inside any part of the body, seek
immediate medical attention.
1
2
3
-1-
ON
OFF
-2-
ON
OFF
ON
-3-
OFF
-4-
ON
OFF
-5-
ON
OFF
Specifications:
Power input: 125V/60Hz
Power output: 1875W/15A (Max.)
Transmitter frequency: 433.92MHz
Remote transmitter battery: DC CR2032, 3V battery 1pc
Transmission range: up to 100ft
1. Step A: Locate the battery compartment on the back of the remote.
Push down and away to slide the compartment cover off.
Step B: Remove the plastic battery tab from the battery
compartment in the back of the remote control to activate
the pre-installed battery.
Step C: Slide the compartment cover on the remote and click
securely into place. Your remote is now ready to use.
2. Plug the receiver into a standard AC electrical wall socket.
Plug the appliance into the receiver outlet.
3.
To turn all outlets ON or OFF at the same time,
press the power button located at the top right corner
of the remote. Meanwhile, the side indicator light
button will also flash ON or OFF. To manually turn
ON or OFF one outlet, press the ON or OFF button
on the remote control for numbers 1-5.
4
Publicidad
