Publicidad
Idiomas disponibles
Idiomas disponibles
Connecting sensors using RF modules:
Connect the USB module into a computer using the
included USB to mini USB cable.
1. Connect one of the paired RF modules to the left side
of the USB module.
2. Separately, connect the second RF module into the
left side of a charged battery module. Note: press
and hold the button on the front of the battery
module: if a light comes on, than the battery has
sufficient power. If no light comes on, than you must
charge the battery some more.
3. Connect whichever sensors you wish to use into the
left side of the second RF module (which is
connected into the battery). Note: You can conduct
experiments with up to 5 NeuLog sensors using the
RF modules.
4. Open the NeuLog application. It will automatically
search for sensors.
5. Once your sensors are detected you are ready to
begin collecting data wirelessly!
V2018.01
20
Home
English
Publicidad
