Bond HYFPY50025-6 Manual De Instrucciones página 8

ASSEMBLY INSTRUCTIONS
4. Attach woven base to the bottom part of the
table top (B) using 4 pcs M6 x 16 screws (AA)
and 4 pcs washers (CC).
5 . Attach hose of regulator to the bracket and then
tighten the preassembled wing screw .
WARNING
The hose must be fixed in the bracket always,
otherwise may get touch with hot surface to
melt and cause fire.
6. Insert the bottom of the door (C) to the hole on
the metal stand (J) and rotate the top to the
unit, this will attach the door (C) to the body.
Bond Manufacturing Co., Inc. | Page 8
B
J
C