Publicidad
Paso 11. Configuración del instalador (continuación)
8. Presione las flechas Hacia arriba o Hacia abajo
para seleccionar el ajuste del número 0170 de
configuración del instalador.
9. Después de seleccionar su ajuste, presione el
botón Next (Siguiente) para pasar al siguiente
número de configuración del instalador.
INSTALLER
SETUP NUMBER
GOES BACK TO
LAST INSTALLER
SETUP
ADVANCE
TO NEXT
INSTALLER SETUP
Installer
Setup
Number
0170
69-1726S—1
Go Back
Installer
Setup
Name
1 - Heating and Cooling (Conventional) -- Gas, oil or
System
electric heating with central air conditioning.
Type
2 - Single-stage Heat Pump with no back-up or
Selection
auxiliary heat -- the compressor runs in both
heating and cooling.
3 - Heat Only with no fan (Conventional) -- Gas, oil
or electric heating without central air conditioning.
No wire on the G terminal on new thermostat.
4 - Heat Only with fan (Conventional) -- Gas, oil or
electric heating without central air conditioning.
Typically wires are R, W and G on new thermostat.
5 - Hot Water Heat Only (Conventional) -- Gas or Oil
hot water heat with three wires connected to new
thermostat or for normally closed hot water values
with wires connected to R and Y on new thermostat.
6 - Cool Only (Conventional) -- Central air
conditioning only.
7 - Multistage Heat Pumps -- heat pump with auxiliary
or back-up heat.
8 - Multistage Conventional Heating and Cooling --
2 stages of Heat (wires on W and W2) and 2 stages
of Cool (wires on Y and Y2).
9 - Multistage Conventional Heating and Cooling --
2 stages of heat (wires on W and W2) and 1 stage
of Cool (wire on Y).
10 - Multistage Conventional Heating and Cooling --
1 stage of heat (wire on W) and 2 stages of Cool
(wires on Y and Y2).
Set To
Clock
More
Next
Done
(Select Your Setting)
Settings
30
SETTING
%
ARROW
DOWN
ARROW
PRESS TO EXIT
INSTALLER SETUP
UP
M22308
Publicidad
