WeatherMate WM20 Manual página 2

P.O. Box 1767 (985) 892-3870
Covington, LA, 70434 USA www.weathermate.us
WeatherMate MANUAL Version 1.00
Open the case and click into the fully opened position OR, if
using a tri/unipod, click to 90-degree position and attach,
using the threaded fitting in the bottom of the case.
POWER ON by pressing the ON/OFF button momentarily.
POWER OFF by pressing and holding the ON/OFF button for
approx. 3 seconds.
AUTO POWER OFF: if the meter is inactive for approx. 5
minutes, it will automatically shut down to preserve the
battery.
OPERATING MODES:Turn the unit on using the ON/OFF
button on the left. Use the MODE button on the right to
scroll to the desired function. To turn off the unit, press and
hold the ON/OFF button for 3 seconds, until the display is
blank, then release.
CHANGING UNITS OF MEASURE: With the WeatherMate
on, change the units of measure by selecting the mode you
wish to change (Windspeed or Temperature). Next, press
and hold the ON/OFF button and, while holding, press the
MODE button to change the units of measure. When
changing the mode for windspeed, you will need to press the
MODE key repeatedly to scroll through options (MS, FPM,
KNT, KMH, MPH, BF (Beaufort). Release the ON/OFF and
MODE buttons when the desired unit is displayed.
NOTE: When you restart your WeatherMate, it will default to
the last mode and unit used.