Publicidad
Idiomas disponibles
Idiomas disponibles
NOTE: Tabs must always be
above the mattress support
when installed as shown in
right picture.
Do not install the mattress
support up side down where
the 4 edges are above the
wire mesh.
C
D
E
NOTE: Please ensure that all the height
adjustment holes are filled with
appropriate bolts after the mattress
E
support has been removed to the desired
level. Make sure that these bolts are
tightly secured. Number of mattress
support position depends on crib's model.
2.3 Please ensure the
label "THIS SIDE UP"
facing upwards.
2.4 Do not remove this
pouch!
4
5
4
5
3
D
5
2.5 Tabs on corners of
mattress support should
point up.
Step 2
Attach E to C and D with
,
Screw
,
to C and D.
2.1 The mattress support has three
adjustable positions.
Loosen the bolt
,
and adjust the
mattress support level.
Make sure you install all of the bolts
in any of the unused adjustable
position holes.
2.2 Rotate the bracket to proper
position as illustrated and attach to
POST with
,
.
4
5
3
X 12
X 8
.
,
X 4
9
Publicidad
