Publicidad
Idiomas disponibles
Idiomas disponibles
Thank you for buying a HIGHSIDER product. Because of our passion for motorcycles all our products are designed to meet your needs as a motorcyclist. We wish you always a safe and pleasant ride with your new HIGHSIDER product
from Paaschburg & Wunderlich GmbH.
Only when professionally installed is the statutory warranty and driving safety fulfilled. Pay attention to the information in the operating instructions of the vehicle or specifications of the vehicle manufacturer. Ask a specialist or mechanic
to do the installation if you are unsure yourself! Failure to follow the assembly instructions can damage your vehicle and void the warranty. This is necessary to not affect the riding safety. No liability is accepted for consequential
damage. The unauthorized reworking and / or modification of the product can lead to the failure of the function and is not permitted. Never look directly into the light of the LED's! This means no registration or carriage of documentation
is needed when installing it onto your motorcycle. Please keep these instructions for later use!
Scope of delivery:
• 1 pc. HIGHSIDER BL CONTROL BOX CB4
• 1 pc. Cable set B + 2x resistor 47 Ω
Installation of the headlight insert:
1. Disconnect the battery before fitting. Make sure that your vehicle is standing securely. Before the permanent installation, we recommend that you carry out a function test of the light.
ATTENTION:
Only connect to a 12V DC vehicle electrical system!
2. The "E-BOX CB4" is protected against wrong polarity.
3. Lay all cables properly. Do not kink the cables. Insulate loose cable ends well! The control box must not be attached to hot components (e.g. motor, voltage regulator, etc.). The box should be protected from water.
4. Always protect the HIGHSIDER BL CONTROL-BOX CB4 with a fuse in the red power supply
5. Connect to the vehicle:
5.1
Green cable with a 47 Ω resistor to the right indicator output from the vehicle [Input].
5.2
Grey cable with a 47 Ω resistor to the left indicator output from the vehicle [Input].
5.3
Black cable 31- to ground [Input]
5.4
Red cable for supply voltage to switched plus (15 +) or to continuous plus (30+) [Input].
With switched plus (15 +), the Coming Home function is deactivated. With continuous plus (30+), the Coming Home function is activated.
flows for the supply of the HIGHSIDER BL CONTROL - BOX CB4.
6. Connect to the indicator / position light:
6.1
Brown cable to the new right indicator [Output].
6.2
White cable to the new position light Right [Output]
6.3
Pink cable to the new indicator left [output].
6.4
Blue cable to the new position light Left [Output].
7.
ATTENTION:
After installation, the correct functioning of the ABS system or CAN bus system must be checked!
8.
ATTENTION:
Check the correct function of the light system before every ride.
Cable connection (connect to 12V DC only)
BL CONTROL-BOX CB4
Vehicle:
Green cable
= Indicator right (+)
Grey cable = Indicator left (+)
Black cable =
ground (–)
Red cable
= Supply voltage (ignition plus or continuous plus (+))
Indicator / position light:
Brown cable
= Indicator right (+)
White cable
= LED position light right (+)
Pink cablel = Indicator left (+)
Blue cable
= LED position light left (+)
Before each ride: It is the duty and responsibility of the rider to regularly check and maintain the safety-related vehicle parts. Before starting your journey, check the correct adjustment and function of the products and the tightness of all screwed connections.
Warranty: Take the time to do a 100% professional job of installing the products. Take into account all our installation and safety instructions.
A faulty, improper installation or handling of the product will void the warranty.
Maintenance/Care: Do not use aggressive detergents to care for the products. The products can be perfectly cleaned with a simple, lukewarm detergent solution. Contact with brake fluid, brake cleaner, fuel, etc. should be avoided. Immediately pick up any unintentionally
applied impurities with a soft cloth and clean the surface with detergent solution
Enviromental Information: This product may not be disposed in the normal household rubbish at the end of its lifetime. The disposal can be done through the Paaschburg u. Wunderlich customer service or a local return and waste collection institution.
HIGHSIDER Tips & Tricks on
https://www.youtube.com/c/HIGHSIDERTippsTricks
Exclusion of liability and warranty regulation:
In the event of improper handling, installation or use of the device, warranty and guarantee claims may expire. Due to the non-verifiability of the correct application, Paaschburg und Wunderlich GmbH assumes no liability for direct or indirect damage or consequential damage resulting from the operation of the device.
This does not apply if the damage is based on intent or gross negligence on the part of Paaschburg & Wunderlich GmbH, or if the damage consists in injury to life, limb or health, or Paaschburg & Wunderlich GmbH has culpably violated an essential contractual obligation (cardinal obligation).
Paaschburg & Wunderlich GmbH, Am Alten Lokschuppen 10a, D-21509 Glinde (GER),
Tel.: +49 (0) 40 248 277-0; E-Mail:
sales@pwonline.de
208-112A_Rev02_2023-04
Please read this manual carefully prior to installation
cable.ATTENTION:
Find useful additional accessories like stem extensions, resistors, electronic relays, adapter cables and other equipment in our Webshop!
:
and safety instructions
Mounting
HIGHSIDER BL CONTROL-BOX CB4 indicator / position light
for HONDA
When the DRL is switched on, the rear light must be also running.
Page 2, Fig. 2
You can find more
www.highsider-germany.de
ATTENTION:
When connecting continuous plus (30+), a small current always
products at:
www.highsider-germany.de
All rights reserved. Changes and errors are excepted.
A: 75 mm
A
Abbildung ähnlich/
Image similar/
Image similaire/
Imagen similar
Seite 3 von 5
Publicidad
