Publicidad
Idiomas disponibles
Idiomas disponibles
Symbols on the mac hine:
W ARNING! The machine can be a
dangerous tool if used incorrectly or
carelessly, which can cause serious or
fatal injury to the operator or others.
Please read the operator's manual
carefully and make sure you
understand the instructions before
using the machine.
Wear personal protective equipment.
See instructions under the "Personal
protective equipment" heading.
Ensure the chain is not cracked or
damaged in any other way.
Do not use chains for wood cutting.
WARNING! Dust forms when cutting,
which can cause injuries if inhaled. Use
an approved breathing mask. Always
provide for good ventilation.
WARNING! Sparks can come from the
bar and chain or other sources. Always
have fire extinguishing tools available if
you should need them. Help prevent
forest fires.
WARNING! Kickbacks can be sudden,
rapid and violent and can cause life
threatening injuries. Read and
understand the instructions in the
manual before using the machine.
Direction of rotation of the
diamond chain and maximum
length of the guide bar.
This product is in accordance
with applicable EC directives.
2 – English
KEY T O SYMBOLS
En vironmental marking. Symbols on
the product or its packaging indicate that
this product cannot be handled as
domestic waste. It must instead be
submitted to an appropriate recycling
station for the recovery of electrical and
electronic equipment.
By ensuring that this product is taken care of correctly, you
can help to counteract the potential negative impact on
the environment and people that can otherwise result
through the incorrect waste management of this product.
For more detailed information about recycling this
product, contact your municipality, your domestic waste
service or the shop from where you purchased the
product.
Other symbols/decals on the mac hine refer to special
certification requirements for certain markets.
Explanation of warning le vels
The w arnings are graded in three levels.
W ARNING!
!
CAUTION!
!
NOTICE!
NO TICE! Used if there is a risk of damage to materials
or the machine if the instructions in the manual are not
followed.
450 mm / 18"
W ARNING! Used if there is a risk of
serious injury or death for the operator
or damage to the surroundings if the
instructions in the manual are not
followed.
CA UTION! Used if there is a risk of injury
to the operator or damage to the
surroundings if the instructions in the
manual are not followed.
Publicidad
