Metrix GX-1030 Guia De Inicio Rapido página 20

TO SELECT THE WAVEFORM
Press [Waveforms] to enter the menu. The example below will help familiarize with the waveform selection settings.
The Waveforms key is used to select basic waveforms.
Waveforms → [Sine]
Press [Waveforms] key and then press [Sine] softkey. The GX 1030 can generate sine waveforms with frequencies
from 1 μHz to 30 MHz. By setting Frequency/Period, Amplitude/High level, Offset/Low level and Phase, a sine waveform
with different parameters can be generated.
Waveforms → [Square]
Press [Waveforms] key and then press [Square] softkey. The generator can generate square waveforms with frequencies
from 1 μHz to 30 MHz and variable duty cycle. By setting Frequency/Period, Amplitude/High level, Offset/Low level,
Phase and DutyCycle, a square waveform with different parameters can be generated.
Waveforms → [Ramp]
Press [Waveforms] key and then press [Ramp] softkey. The generator can generate ramp waveforms with frequencies
1µHz to 500 kHz and variable symmetry. By setting Frequency/Period, Amplitude/High level, Phase and Symmetry, a
ramp waveform with different parameters can be generated.
Waveforms → [Pulse]
Press [Waveforms] key and then press [Pulse] softkey. The generator can generate pulse waveforms with frequencies
from 1 μHz to 12.5 MHz and variable pulse width and rise/fall times. By setting Frequency/Period, Amplitude/High level,
Offset/Low level, PulWidth/Duty, Rise/Fall and Delay, a pulse waveform with different parameters can be generated.
Waveforms → [Noise]
Press [Waveforms] key and then press [Noise Stdev] softkey. The generator can generate noise with a 60 MHz
bandwidth. By setting Stdev and Mean, noise with different parameters can be generated.
Waveforms → [DC]
Press [Waveforms] key and then press [Page 1/2], last press the DC softkey. The generator can generate a DC signal
with a level up to ± 10 V into a HighZ load or ± 5 V into a 50 Ω load.
Waveforms → [Arb]
Press [Waveforms] key and then press [Page 1/2], lastly press the [Arb] softkey.
The generator can generate repeatable arbitrary waveforms with 16 K points and frequencies up to 6 MHz. By setting
Frequency/Period, Amplitude/High level, Offset/Low level and Phase, an arbitrary waveform with different parameters
can be generated.
20