Hkoenig V24 Manual De Instrucciones página 13

button (7) again, go on ironing.
To keep on working, simply restore the water level in the self--refilling
tank as described in the "Preparation for use" paragraph.
PUTTNG THE APPLIANCE AWAY
First ensure that the appliance has cooled down completely. Empty
the water tank ( 14) .
lt is not necessary to drain the boiler after ironing.
Steam line (5) and power cord (9) could be receipt into the wire groove
(12) and line box (10).
LOCKING IRON
To Iock the iron it must be set on the rear part of the rest mat (Fig11).
NOTE: make sure to firmly hook the iron to prevent it falling
accidentally.
CARE OF YOUR STEAM IRONING
Before attempting any maintenance operation, always disconnect the
appliance from the mains. To clean the body of the appliance, simply
use a moist cloth. Do not use solvents or detergents which may harm
the body material.
Always keep the surface the ironing plate perfectly clean. To clean it,
jus! wipe the cold surface with a damp cloth. The appliance must not
be cleaned with descaling agents.
Do not iron over zippers, hooks, rings, etc; as these may scratch the
plate. When you have finished ironing. Place the iron correctly on its
stand. Ensure that there are no traces of water under the plate, as
these may cause stains.
Store the appliance in a dry place