Onkyo LS7200 Manual De Instrucciones página 32

> Before Start > Part Names
DTS Express
This mode reproduces the sound design recorded in the
DTS Express audio format.
DTS Express is used as an optional audio format on Blu-ray
Discs, based on 5.1ch, but with channels such as the
surround back channel added for a maximum of 7.1ch. It
also supports low bit rates.
0 To enable transfer of this audio format, connect via HDMI
cable and set audio output on the player to bitstream
output.
DTS-HD HR (DTS-HD High Resolution Audio)
This mode reproduces the sound design recorded in the
DTS-HD High Resolution Audio audio format.
DTS-HD High Resolution Audio is used as an optional
audio format on Blu-ray Discs, based on 5.1ch, but with
additional channels such as the surround back channel
added for a maximum of 7.1ch. It can be recorded at a
sampling rate of 96 kHz with a resolution of 24 bits.
0 To enable transfer of this audio format, connect via HDMI
cable and set audio output on the player to bitstream
output.
DTS-HD MSTR (DTS-HD Master Audio)
This mode reproduces the sound design recorded in the
DTS-HD Master Audio audio format.
DTS-HD Master Audio is used as an optional audio format
on Blu-ray Discs, based on 5.1ch, but with additional
channels such as the surround back channel added for a
maximum of 7.1ch, recorded using lossless audio
reproduction technology. 96 kHz/24bit is supported with
7.1ch, and 192 kHz/24bit is supported with 5.1ch.
0 To enable transfer of this audio format, connect via HDMI
cable and set audio output on the player to bitstream
output.
DTS Neural:X
This listening mode allows you to expand the playback
signal to multiple channels to suit this unit's speaker
32
> Install > Initial Setup
configuration.
DTS:X
This mode reproduces the sound design recorded in the
DTS:X audio format.
The DTS:X audio format is a combination of the mixing
methodology based on past channel based formats and
object based dynamic audio mixing, and it is characterized
by the precise positioning of sounds and the ability to
express movement.
0 To enable transfer of this audio format, connect via HDMI
cable and set audio output on the player to bitstream
output.
Full Mono
In this mode, all speakers output the same sound in mono,
so the sound you hear is the same regardless of where you
are within the listening room.
Game-Action
In this mode, sound localization is distinct with emphasis on
bass.
Game-Sports
Suitable for audio source with much reverberation.
Mono
In this mode, monaural sound is played back from the front
left and right speakers during analog or PCM signal input.
Multich (Multichannel)
Mode suitable for playing sources recorded in multichannel
PCM.
Stereo
In this mode, sound is output from the front left and right
speakers and subwoofer.
Surround Enhancer
This mode allows you to enjoy sound with a rich sound field,
> Playback
Advanced Setup | Firmware Update | Others
enveloping you naturally without relying on reflections from
walls. A virtual surround channel is created to give you a
broader sound field.
T-D (Theater-Dimensional)
In this mode, you can enjoy a virtual playback of
multichannel surround sound with surround speakers
connected. This works by controlling how sounds reach the
listener's left and right ears.
TV Logic
Suitable for TV shows produced in a TV studio. This mode
enhances the surround effects to the entire sound to give
clarity to voices and create a realistic acoustic image.
E
N