Publicidad
Belt Changing
POWER NOZZLE CARE
- 40 -
Always follow all safety precautions
before performing maintenance to
the POWER NOZZLE.
WARNING
Electrical Shock or Personal Injury
Hazard.
Disconnect the electrical supply
before performing maintenance to
the vacuum cleaner. Failure to do
so could result in electrical shock
or personal injury from vacuum
cleaner suddenly starting.
TO REMOVE BELT
➢ Turn Power Nozzle upside down.
➢ Unscrew six (6) Power Nozzle cover
screws.
➢ Turn Power Nozzle right side up.
Press handle release pedal and lower
the swivel. Lift rear latches up.
➢ To remove cover, grasp the rear and
pull up.
Publicidad
