Ibiza Light STROBE112LED Manual De Instrucciones página 2

Safety Instructions
Please read these instructions carefully, they include important information about the installation, usage and
maintenance of this product.
• Please keep this User Guide for future reference. If you sell the unit to another user, be sure that he also receives
this instruction booklet.
• Always make sure that you are connecting to the proper voltage, and that the line voltage you are connecting to is
not higher than that stated on the bottom of the fixture.
• This product is intended for indoor use only!
• To prevent risk of fire or shock, do not expose fixture to rain or moisture. Make sure there are no flammable
materials close to the unit while operating.
• The unit must be installed in a location with adequate ventilation, at least 20in (50cm) from adjacent surfaces. Be
sure that no ventilation slots are blocked.
• Always disconnect from power source before servicing.
• Maximum ambient temperature (Ta) is 104° F (40°C). Do not operate the fixture at temperatures higher than this.
• In the event of a serious operating problem, stop using the unit immediately. Never try to repair the unit by
yourself. Repairs carried out by unskilled people can lead to damage or malfunction. Please contact the nearest
authorized technical assistance center. Always use the same type of spare parts.
• Don't connect the device to a dimmer pack.
• Make sure the power cord is never crimped or damaged.
• Never disconnect the power cord by pulling or tugging on the cord.
• Avoid direct eye exposure to the light source while it is on.
OPERATION
Plug the unit into an appropriate wall outlet. The unit starts working automatically.
1). Rotate the black button (1) to control the sensitivity of the light via the built-in
microphone (2).
2). Press the red button to switch between Auto & Sound Mode.
Specifications
Voltage: ................................................................................................................... 220-240V / 50-60Hz
Power consumption: .......................................................................................................................................... 20W
Light source: .........................................................................................................112 x 10mmØ RGB LEDs
Operating modes: ................................................................................. Sound control, Auto-run
Max. Ta ................................................................................................................................. 40°C
Dimensions ................................................................................. 220 (L) × 220 (W) × 220 (H)mm
N.W: ....................................................................................................................................... 1kg
©Copyright LOTRONIC 2014
GB
Page 2