Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLING THE FAN
1.
If you want to use this fan as a "standing fan" with the base, insert the Base Shaft
(K) into the Round Base (L). Skip this step if you are mounting it or using it as a
desk fan.
Upper Base Shaft
Round Base
2.
Loosen the height Adjustment nut (J), pull out the Extendable Shaft (I) from the
upper base (K) shaft. Fast the screw ring connecting the motor (E) to the
extendable shaft (I) Then, use the screw to fasten the motor
Motor
Screw
Extendable Shaft
3.
Put the Rear Grill (D) on the motor and fasten it with the four screws (C).
Rear Grill
Screw
Motor
M5x8
4.
Push the blade (B) onto the motor shaft, using the screws to fasten it.
Screw
Blade
5.
Place the front grill (A) onto the rear grill (D) and secure the tip lace using the
grill retaining clips. Using the screw and nut (S), screw on the nut to secure the
grills together.
Front Grill
8
Publicidad
