Oregon Scientific BAR688HG Manual Del Usuario página 5

Idiomas disponibles

Clock / Alarm Area:

1. Alarm set

2. AM / PM icon

3. Clock signal reception

4. Low battery icon

5. Clock

6. Alarm mode icon

7. Moon phase

REMOTE SENSOR (THGN122N)

1. LED status indicator:

Blinks red during data

transmission

P/N:086L004344-058 REV 1

5/94

1. Wall mount hole

2. RESET hole

3. CHANNEL switch

4. Battery compartment

GETTING STARTED

BATTERIES

Insert batteries before ﬁrst use, matching the polarity (+

and -). Press RESET after each battery change.

indicates main unit batteries are low.

NOTE Do not use rechargeable batteries. We

recommend that you use alkaline batteries with this

product for longer usage and lithium batteries in

temperatures below freezing.

REMOTE SENSOR

The sensor collects temperature readings approx. every

40 seconds and sends them to the main unit. The main

unit can collect data from up to 3 sensors.

To set up the sensor:

1. Remove the screws from the battery door.

2. Insert the batteries, matching the polarity (+ / -).