Publicidad
20 Channels
Channel
Function
X
1
Y
2
X 16Bit
3
Y 16Bit
4
Dimming
5
RED
6
Green
7
Blue
8
A/Red
9
A/Green
10
A/Blue
11
B/Red
12
B/Green
13
B/Blue
14
A/B Switch
15
Flash
16
Stand-alone/ sound-
17
active
Stand-alone speed/
18
sound-active volume
X-Y Speed
19
20
Reset
DMX-512 CONNECTION
If you are using a standard DMX controller, you can connect the DMX output of the controller directly to the DMX
input of the first unit in a DMX chain. If you wish to connect a DMX controller with other XLR outputs you will need
to use adapter cables.
Connect the DMX output of the first unit in a DMX chain with the DMX
input of the next unit in the chain. Always connect the output of one unit
with the input of the next unit until all units are connected. If you use a
controller with 5 pin DMX connection you will need to use a 5 pin to 3 pin
adapter.
Caution at the unit, the DMX cable has to be terminated with a terminator. Solder a 120 Ohm resistor
between signal (-) and signal (+) into a 3-pin XLR connector and plug this into the DMX output of the
last unit in the chain.
Value
Description
001-127
0-360
128-191
Free rotates clockwise from slow to fast
192-255
Free rotates counter-clock-wise from slow to fast
001-127
0-360
128-191
Free rotates clockwise from slow to fast
192-255
Free rotates counter-clock-wise from slow to fast
000-255
000-255
000-255
From dark to bright
000-255
From dark to bright
000-255
From dark to bright
000-255
From dark to bright
000-255
From dark to bright
000-255
From dark to bright
000-255
From dark to bright
000-255
From dark to bright
000-255
From dark to bright
000-255
From dark to bright
000-084
OFF
085-169
B Turns on
170-255
A Turns on
000-255
From slow to fast
002-060
Gradually
061-120
Jump
121-180
Gradually+Jump
181-240
Sound-active / flash
241-255
Sound-active/ Jump
000-255
From fast to slow
000-255
From fast to slow
000-254
Not applicable
255
Reset after 2 second intervals
12
Publicidad
