Basic Settings; Picture Settings - Velleman DPF7 Manual Del Usuario

3. Installation and Description
Refer to the illustrations on page 2 of this manual.
1 power and SET button
2 right and pause button
3 left, time & index button
4 up, enter and return button
5 down & wide button
6 holes for stand

4. Basic Settings

1. Turn On/Off
After plugging in the supplied AC adaptor, the photo frame automatically turns on and displays the calendar.
To turn the calendar display off, hold down the
again to turn the photo frame back on.
2. Inserting a Memory Card or USB Flash Drive
Gently insert an SD memory card, MMC memory card, or memory stick into the card slot with its label side
facing forward. It is normal for a portion of the memory card to remain outside of the photo frame. Please do
not try to jam the memory card into the unit. Gently insert a USB flash drive into the USB input slot. The USB
flash drive will only fit in one direction. Please do not force the USB flash drive into the slot; if it is not easily
inserting, try inserting it in the other direction.
Note: When a USB flash drive is inserted into this photo frame, the USB flash drive takes priority. For
example: If you were to insert a memory card and a USB flash drive, this photo frame will only read the
images on the USB flash drive.
3. Auto Image Rotation
While in the calendar display, press the SET button 4 times to display the Auto Rotation settings. Press the
button to select Auto Rotation ON or OFF. This will activate or deactivate the auto rotation feature. Once
activated, you can install the removable stand onto the photo frame, orienting it in either portrait or landscape
mode. After adjusting the orientation, the photo frame will automatically adjust the single image on the
display 90 degrees to its proper orientation.
Note: Auto Image Rotation is not available in the following modes: Settings Menu, Image Index, Calendar
Display, Slide Show, and Analog/Digital Clock. There may be occasions when Auto Image Rotation may
not properly orient your image. If this occurs, try rotating the photo frame in the opposite orientation,
then rotating it back; or placing the photo frame down on a flat stable surface.
4. Calendar/Clock Display
This photo frame automatically defaults to the calendar display with slide show images. Press the
switch to the clock display. Continue pressing to toggle between the analogue and digital clock. Press the
button to return to the calendar display.
Note: In the calendar display, it is not possible to make the slide show images still images.
5. Setting the Date/Time
In the calendar display, press the SET button once to display the time setting options. Press the
to select the year/month/date/hour/minute in sequence. For each setting, use the
value. Press the SET button to confirm your settings.
6. Setting the Slide Show Interval
In the calendar display, press the SET button twice to display the slide show setting options. Press the
button to adjust the time between images. Select the interval value from 3 sec., 10 sec., 30 sec., 1 min., 3
min., 5 min., 15 min., 30 min., 1 hour, 4 hours, 12 hours and 1 day. Press the SET button to confirm your
settings.

5. Picture Settings

7. Slide Show / Still Images
In the calendar display, images are automatically displayed one after another. Press the
screen slide show mode. The slide show effects are random. To pause the slide show on a single image, press
the button on the image you would like to pause. The symbol will appear in the top left corner of the display,
and the image will be paused. To resume playback, press the
to the symbol.
8. Setting the Brightness / Contrast / Colour
In full screen display mode, press the SET button to display the brightness/contrast/colour setting options.
Press the / button to select the setting, and use the
Setting value options:
Brightness (1 ~ 16)
Contrast (1 ~ 31)
Colour (1 ~ 31)
Press the SET button to confirm your settings.
18.03.2010
DPF7
7 stand
8 holes for wall-mounting
9 USB input
10 memory card slot
11 mains input
button until the photo frame turns off. Press the
button again. The
/ button to adjust the value.
5
Rev. 02
button
button to
/ button
/ button to adjust the
button to enter full
symbol will change back
©Velleman nv