Philips 42PFP5342D Guia Del Usuario página 50

OSD DISPLAY
ON Normal screen information is displayed (e.g. channel information)
OFF Screen information is suppressed (except for some VGA input, if present)
SWITCH ON VOLUME
When the user switches the TV ON, it will play at the specified volume level.
Note: "SWITCH ON VOLUME" cannot exceed the MAXIMUM VOLUME level. Whenever the
BDS Mode Setup menu is accessed, the current volume level is reset to the SWITCH ON
VOLUME level.
MAXIMUM VOLUME
This option specifies the maximum allowable volume level of the TV.
SWITCH ON CHANNEL
When the user powers on the TV, it will tune to the channel specified by this setting. The switch
on channel is selected from a list of installed channels.
HIGH SECURITY MODE
ON This allows access to the BDS Mode Setup Menu via the special BDS Setup Remote only.
OFF This allows access to the BDS Mode Setup Menu via BDS Setup Remote or via normal
Remote Control (using a special key code sequence).
POWER ON
The Power On function allows the TV to enter a specific mode of operation (On or Standby)
after the mains power is activated.
ON When set, the TV will always turn ON after the mains power is enabled.
STANDBY When set, the TV will always turn to STANDBY after mains power is enabled
DISPLAY MESSAGE
ON Enables display of the Welcome Message for 30 seconds after the TV set is turned on
OFF Disables the display of the Welcome Message.
If OSD DISPLAY is set to OFF, then the Welcome Message is automatically disabled.
WELCOME MESSAGE
The Welcome Message function allows the TV to show a customized greeting to the hotel guest
whenever the TV is switched on. This helps to personalize the hotel experience for guests.
The Welcome Message can consist of 2 lines of text, with each line containing a maximum of 20
alphanumeric characters. Use the arrow keys of the Remote Control to compose the Welcome
Message.
To enable the display of the Welcome Message, the DISPLAY MESSAGE option must be ON
USB BREAK IN
When enabled, this function allows easy access and navigation to any USB device attached to the
USB connector on the TV set (when BDS Mode is ON).
Version 1.4