Mitsubishi Electric SRK20ZJX-S Manual Del Propietário página 6

Name of each part and its function
Unit display section
Unit ON/OFF button
This button can be used for turning on/off the unit when remote
control is not available.
Page 6
Remote control signal receiver
3D AUTO light (green)
Illuminates during 3D AUTO operation.
HI POWER light (green)
Illuminates during HIGH POWER operation.
• Do not touch the air inlet panel while it is operating.
The air inlet panel opens up while the system is operating.
Please do not install the unit in a fashion in which the air inlet panel
cannot open or place objects near the indoor unit.
NOTE
Buzzer sound for remote control
•
When preset temperature 24°C, automatic operation and automatic airflow are selected, the buzzer sound (PiPi) is produced.
When turning off the air conditioner by pressing ON/OFF button (except CLEAN mode), the buzzer sound (Pi) is produced.
This function is useful for operating the air conditioner in the darkness.
Air flow setting
CAUTION
Preset temperature
– 5 –
RUN (HOT KEEP) light (green/blue)
• Illuminates during operation.
green : except ECONO operation
blue : ECONO operation
• Blinks when airflow stops due to the 'HOT
KEEP' and 'CLEAN operation'.
1.5 sec.
ON
HOT KEEP
OFF
0.5 sec.
3 sec.
ON
CLEAN operation
OFF
1 sec.
Page 15
TIMER light (yellow)
Illuminates during TIMER operation.