Remote Control
/
FUNCTION
SRC (source)
Frequently used operations
The available buttons vary depending on the unit.
Purpose
Turn on the power*
Press SRC/OFF to turn on
the power.
Press and hold SRC/OFF to
turn off the power.
Adjust the volume
Turn the M.C. dial.
Select a source
Press SRC/OFF repeatedly.
Change the display
Press DISP repeatedly.
information
Return to the previous
Press
display/list
BAND/
Return to the normal display
Press BAND/
from the menu
and hold BAND/
* When this unit's blue/white lead is connected to the vehicle's auto-antenna relay control terminal,
the vehicle's antenna extends when this unit's source is turned on. To retract the antenna, turn the
source off.
Display indication
Indication
Description
Appears when a lower tier of the menu or folder exists.
Appears when the
4
En
VOLUME +/–
MUTE
AUDIO
DISP (display)
Operation
Head Unit
Remote Control
Press SRC to turn on the
power.
Press and hold SRC to turn
off the power.
Press VOLUME + or –.
Press MUTE to mute the
unit. Press again to unmute.
Press SRC repeatedly.
Press DISP repeatedly.
/DIMMER or
Press
/
to select the
.
next/previous folder.
, or press
–
.
button is pressed.
Indication
Description
Appears when the local seek tuning function is set (page 10).
Appears when the sound retriever function is set (page 10).
Appears when random/shuffle play is set.
Appears when repeat play is set.
Appears when the iPod control function is set (page 7).
Detaching the front panel
Detach the front panel to prevent theft. Remove any cables and devices attached to the
front panel and turn off the unit before detaching it.
Detach
Important
• Avoid subjecting the front panel to excessive shock.
• Keep the front panel out of direct sunlight and high temperatures.
• Always store the detached front panel in a protective case or bag.
Preparing the remote control
Remove the insulation sheet before use.
How to replace the battery
Insert the CR2025 (3 V) battery with the plus (+) and
minus (–) poles orientated properly.
Attach