Publicidad
9. Battery Slot
To mount the battery for power supply.
10. Battery Release Button 1
11. Battery Release Button 2
12. Expansion Plate Port Cover
The expansion plate port under the cover is used to mount the remote monitor expansion
plate to expand input of DC and CAN and output of HDMI and SDI.
13. Cage
There are 1/4" screw holes, 1/8" screw holes, and hand grips ports on the cage to mount the
corresponding accessories.
Mounting and Removing the Battery
Activation
The monitor requires activation before using for the first time. Power on the monitor and
connect it to the computer. Launch DJI Assistant 2 (Ronin Series), click the corresponding icon of
the device and follow the instructions to activate the device.
Linking
Linking between the monitor and the Ronin 4D video transmitter is required before use. Make
sure that the video transmitter is mounted to the Ronin 4D before linking. The monitor has two
work mode: control mode and audience mode. The linking method varies depending on the work
mode.
Control Mode
1. Power on the monitor. Tap
Device Pairing under Control Mode, set the monitor in use as RC A or RC B, and tap Connect to
enter linking status.
2. In Image Transmission Settings in the Ronin 4D ultra-bright main monitor, tap Pairing to enter
linking status.
3. The ultra-bright remote monitor will display connected status after linking is successful. The
to enter System Settings and then Connection Settings. Tap
Publicidad
