RACE MODE:
Press and hold MODE button for 2 seconds to enter RACE mode.
In RACE mode, only TIME and DIST (DISTANCE) can be set.
Default values for 10 minutes / 4 (KM or Miles).
Total is 10 bars.
PULSE:
To measure the pulse, press MODE button until meter is on the PULSE function. Hold the hand pulse
sensors for at least 5 seconds to measure your pulse. This value is for reference only. It cannot be
used as the basis for medical treatment.
BATTERY: This meter uses two AAA batteries. If the display appears incorrectly or becomes difficult
to read, please install new batteries. Always change both batteries at the same time. Do not mix
battery types and do not mix old and new batteries. Dispose batteries according to your state and
regional guidelines.
29