Publicidad
Idiomas disponibles
Idiomas disponibles
Twist high performance filter in direction of arrow to
unfasten securing lip from cleaner unit and then pull off
the filter.
Fig.12
► 1 . Securing lip
NOTE: When using the prefilter, also follow the pro-
cedure above.
Clean out the fine dust and lightly tap to dislodge dust
from high performance filter.
Reassembly
Connect high performance filter. At this time, make sure
to twist high performance filter so that securing lip is
firmly locked into the cleaner unit.
1
Fig.13
► 1 . High performance filter
Fig.14
► 1 . Securing lip
1
1
NOTICE:
Always be sure to check that high per-
formance filter is loaded correctly prior to using
cleaner. If it is not loaded correctly, dust will get into
the motor housing, and cause motor failure.
If the problem as described later occurs, high perfor-
mance filter is not loaded correctly. Reload it correctly
to rectify problem.
Attach the capsule. Align the mark on capsule with the
mark on the handle and then firmly twist capsule in the
direction of arrow until it is secured.
3
Fig.15
► 1 . Mark 2. Handle 3. Capsule
NOTE: Always remove dust ahead of time, as suction
power will be reduced if there is too much dust in
cleaner.
Problem Example
The securing lip of high performance filter is not firmly
locked into groove of cleaner housing.
Fig.16
► 1 . Securing lip 2. Groove of cleaner housing
9 ENGLISH
1
2
2
1
Publicidad
