Black and Decker BAPUV350 Manual De Instrucciones página 8

SET UP & USE
CONTROL PANEL
Turn ON/OFF buttons
1. Plug in the power cord, the machine is in standby state, and the color of ON/
OFF indicator is red.
2. Press the "ON"/"OFF" button to enter the startup state. The color of the
"ON"/"OFF" indicator is blue.
Auto mode is turned on by default after startup.
3. Press the "ON/OFF" button again, and the machine will be shut down, put into
standby mode, and the indicator light is red for turn ON/OFF.
Auto mode key
In Auto mode, the fan speed is automatically set according to the air quality in the
room.
Fan speed
There are four fans speeds. LOW, MEDIUM, HIGH and MAX settings. They will be
labeled from lowest to highest 1-2-3-4 to indicate the different speeds.
AUTO Mode and fan speed cannot run simultaneously. When the fan speed setting is
on, the color indicator will be blue. When the fan speed setting is off, the color
indicator will be white.
To change the speed from AUTO mode, touch the speed button
scroll through LOW
To shut off the unit at any time, touch and hold the POWER button
indicator lights go OFF. The red power button will be illuminated. Unplug the air
purifier.
Page 8
MEDIUM HIGH and MAX settings.
continuously to
until all