Descargar Imprimir esta página

Segway Ninebot miniPRO Manual Del Usuario página 7

Ocultar thumbs Ver también para Ninebot miniPRO:

Publicidad

Idiomas disponibles

Idiomas disponibles

7
Charging
Do not connect the charger if the charge port or charge cable is wet.
Charge
port
8
Learning to Ride
WARNING
Rider must weigh 85–220 lbs (40–100 kg)
and must be 4'3"–6'6" (130–200 cm) tall.
Wear an approved helmet and other
protective gear to minimize any
possible injury.
08
All manuals and user guides at all-guides.com
Lift up the
Open the
cover
rubber cap
Your miniPRO is fully charged when the LED on the charger
changes from red (charging) to green (trickle charge).
After activation, the App will lead you through the New
Rider Tutorial. Please follow the instructions in the App
and in this manual.
NOTE
You must first download the Ninebot by Segway App on
your mobile device. The App will lead you through the
New Rider Tutorial.
For your safety, the miniPRO will limit the max speed to
4.3 mph (7 km/h) until you complete the New Rider
Tutorial. For the first 0.6 miles (1 km) after completing
the New Rider Tutorial, the max speed will be limited to
6.2 mph (10 km/h), after which you can disable the
speed limiter via the App and reach a maximum speed
of 10 mph (16 km/h).
Insert the plug
into the socket
1
Go to a large open area and
ask a friend to assist you on
your first ride.
WARNING
Always step on from the
back of the miniPRO.
Stand with your weight
4
evenly distributed on
both feet and relax,
looking straight ahead.
≥4m
≥4m
Place one foot on the foot
2
mat, with your other foot still
on the ground holding your
weight. Do not press the
steering bar with your leg.
Gently lean your body
5
forward and backward to
control your movement.
Slowly transfer your weight
3
onto the miniPRO. The unit
will beep, indicating it is now
in balance mode. Slowly
step on with your other foot.
To turn, gently lean left or
6
right against the steering bar.
09

Publicidad

loading