KBS Keenbot T5 Pro Manual De Instrucciones página 31

Boosting the New Revolution of Intelligent Unmanned Delivery
5. Robot Maintenance
5.1 Maintenance
from the socket and the adapter from the robot.
Clean the LiDAR sensor, RGB-D camera, and top image module with a
After using the robot, clean the dirt with a soft damp cloth and wipe the
robot dry completely with a dry cloth.
Use disinfectant ethanol to disinfect the exterior of the robot. Do not
spray liquid directly onto the robot. Use a cloth dampened in the
disinfectant to clean the robot.
Regularly check and clean the bottom of the robot every six months.
The machine needs to check and clean up safety related equipment
and safety function inspections
the expiration date, the machine will stop working and pop up a reminder
that maintenance is required. After seeing the reminder, please contact
professional after-sales maintenance personnel for timely on-site
machine.
It is necessary to check the application environment of the robot every
labels are complete, and whether the lighting equipment on site is aging
or damaged. Whether the ambient light intensity is in the range of
If there are water or oil stains on the machine or the ground, please
clean it up in time.
Remove the hair and dust stuck on the wheel.
To clean the driven wheels, remove them from the robot and wipe with
a damp cloth.
If the robot is dirty, place it on its side on a soft surface and wipe it clean
with a cloth dampened in neutral detergent.
(such as emergency stop function, obstacle
every 6 months. One week before
29
| Keenon Robotics |